Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

Erick Hanson Bolanos Valencia; Yeimy Salvatierra Garcia; Grimaldo Quispe Santivanez; Elva Castaneda

doi:10.1109/ICIM56520.2022.00040

Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

Erick Hanson Bolanos Valencia, Yeimy Salvatierra Garcia, Grimaldo Quispe Santivanez, Elva Castaneda

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

2 Citas (Scopus)

Resumen

The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7% in preparation time, 3% in cycle time and 4.2% in production capacity.

Idioma original	Inglés estadounidense
Título de la publicación alojada	Proceedings - 2022 8th International Conference on Information Management, ICIM 2022
Editorial	Institute of Electrical and Electronics Engineers Inc.
Páginas	182-185
-	4
ISBN (versión digital)	9781665451741
DOI	https://doi.org/10.1109/ICIM56520.2022.00040
Estado	Indizado - 2022
Publicado de forma externa	Sí
Evento	8th International Conference on Information Management, ICIM 2022 - Cambridge, Reino Unido Duración: 25 mar. 2022 → 27 mar. 2022

Serie de la publicación

Nombre	Proceedings - 2022 8th International Conference on Information Management, ICIM 2022

Conferencia

Conferencia	8th International Conference on Information Management, ICIM 2022
País/Territorio	Reino Unido
Ciudad	Cambridge
Período	25/03/22 → 27/03/22

Nota bibliográfica

Publisher Copyright:
© 2022 IEEE.

Acceder al documento

10.1109/ICIM56520.2022.00040

Citar esto

Bolanos Valencia, E. H., Garcia, Y. S., Santivanez, G. Q., & Castaneda, E. (2022). Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. En Proceedings - 2022 8th International Conference on Information Management, ICIM 2022 (pp. 182-185). (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICIM56520.2022.00040

Bolanos Valencia, Erick Hanson ; Garcia, Yeimy Salvatierra ; Santivanez, Grimaldo Quispe et al. / Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Institute of Electrical and Electronics Engineers Inc., 2022. pp. 182-185 (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022).

@inproceedings{03b0bd9164214919a36d8cf1cb1fe68f,

title = "Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector",

abstract = "The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7% in preparation time, 3% in cycle time and 4.2% in production capacity.",

keywords = "SMED, Set-up, VSM, lean manufacturing, metalworking",

author = "{Bolanos Valencia}, {Erick Hanson} and Garcia, {Yeimy Salvatierra} and Santivanez, {Grimaldo Quispe} and Elva Castaneda",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 8th International Conference on Information Management, ICIM 2022 ; Conference date: 25-03-2022 Through 27-03-2022",

year = "2022",

doi = "10.1109/ICIM56520.2022.00040",

language = "American English",

series = "Proceedings - 2022 8th International Conference on Information Management, ICIM 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "182--185",

booktitle = "Proceedings - 2022 8th International Conference on Information Management, ICIM 2022",

address = "United States",

}

Bolanos Valencia, EH, Garcia, YS, Santivanez, GQ & Castaneda, E 2022, Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. En Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Proceedings - 2022 8th International Conference on Information Management, ICIM 2022, Institute of Electrical and Electronics Engineers Inc., pp. 182-185, 8th International Conference on Information Management, ICIM 2022, Cambridge, Reino Unido, 25/03/22. https://doi.org/10.1109/ICIM56520.2022.00040

Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. / Bolanos Valencia, Erick Hanson; Garcia, Yeimy Salvatierra; Santivanez, Grimaldo Quispe et al.
Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Institute of Electrical and Electronics Engineers Inc., 2022. p. 182-185 (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022).

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

AU - Bolanos Valencia, Erick Hanson

AU - Garcia, Yeimy Salvatierra

AU - Santivanez, Grimaldo Quispe

AU - Castaneda, Elva

PY - 2022

Y1 - 2022

N2 - The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7% in preparation time, 3% in cycle time and 4.2% in production capacity.

AB - The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7% in preparation time, 3% in cycle time and 4.2% in production capacity.

KW - SMED

KW - Set-up

KW - VSM

KW - lean manufacturing

KW - metalworking

UR - http://www.scopus.com/inward/record.url?scp=85137061898&partnerID=8YFLogxK

U2 - 10.1109/ICIM56520.2022.00040

DO - 10.1109/ICIM56520.2022.00040

M3 - Conference contribution

AN - SCOPUS:85137061898

T3 - Proceedings - 2022 8th International Conference on Information Management, ICIM 2022

SP - 182

EP - 185

BT - Proceedings - 2022 8th International Conference on Information Management, ICIM 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 8th International Conference on Information Management, ICIM 2022

Y2 - 25 March 2022 through 27 March 2022

ER -

Bolanos Valencia EH, Garcia YS, Santivanez GQ, Castaneda E. Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. En Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Institute of Electrical and Electronics Engineers Inc. 2022. p. 182-185. (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022). doi: 10.1109/ICIM56520.2022.00040

Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

Acceder al documento

Huella

Citar esto