Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

Cesar Cáceres-Mauricio; Daniel Romero-Vasquez; Juan Carlos Quiroz-Flores

Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

Cesar Cáceres-Mauricio
, Daniel Romero-Vasquez
, Juan Carlos Quiroz-Flores

Facultad de ingeniería

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

5 Citas (Scopus)

Resumen

Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77% and 95% respectively; in addition to the reduction of defective products by up to 2%.

Idioma original	Inglés estadounidense
Título de la publicación alojada	Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology
Subtítulo de la publicación alojada	Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023
Editores	Maria M. Larrondo Petrie, Jose Texier, Rodolfo Andres Rivas Matta
Editorial	Latin American and Caribbean Consortium of Engineering Institutions
ISBN (versión digital)	9786289520743
Estado	Indizado - 2023
Evento	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 - Buenos Aires, Argentina Duración: 19 jul. 2023 → 21 jul. 2023

Serie de la publicación

Nombre	Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology
Volumen	2023-July
ISSN (versión digital)	2414-6390

Conferencia

Conferencia	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023
País/Territorio	Argentina
Ciudad	Buenos Aires
Período	19/07/23 → 21/07/23

Nota bibliográfica

Publisher Copyright:
© 2023 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.

Citar esto

Cáceres-Mauricio, C., Romero-Vasquez, D., & Quiroz-Flores, J. C. (2023). Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. En M. M. Larrondo Petrie, J. Texier, & R. A. R. Matta (Eds.), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023 (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July). Latin American and Caribbean Consortium of Engineering Institutions.

Cáceres-Mauricio, Cesar ; Romero-Vasquez, Daniel ; Quiroz-Flores, Juan Carlos. / Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. editor / Maria M. Larrondo Petrie ; Jose Texier ; Rodolfo Andres Rivas Matta. Latin American and Caribbean Consortium of Engineering Institutions, 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

@inproceedings{453987d78be64937b432ea9fe4f17a26,

title = "Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector",

abstract = "Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77\% and 95\% respectively; in addition to the reduction of defective products by up to 2\%.",

keywords = "5'S, Change management, Demand Driven, Jidoka, MRP, PDCA Cycle, Total Productive Maintenance",

author = "Cesar C{\'a}ceres-Mauricio and Daniel Romero-Vasquez and Quiroz-Flores, \{Juan Carlos\}",

note = "Publisher Copyright: {\textcopyright} 2023 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.; 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 ; Conference date: 19-07-2023 Through 21-07-2023",

year = "2023",

language = "American English",

series = "Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology",

publisher = "Latin American and Caribbean Consortium of Engineering Institutions",

editor = "\{Larrondo Petrie\}, \{Maria M.\} and Jose Texier and Matta, \{Rodolfo Andres Rivas\}",

booktitle = "Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology",

}

Cáceres-Mauricio, C, Romero-Vasquez, D & Quiroz-Flores, JC 2023, Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. En MM Larrondo Petrie, J Texier & RAR Matta (eds.), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, vol. 2023-July, Latin American and Caribbean Consortium of Engineering Institutions, 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023, Buenos Aires, Argentina, 19/07/23.

Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. / Cáceres-Mauricio, Cesar; Romero-Vasquez, Daniel; Quiroz-Flores, Juan Carlos.
Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. ed. / Maria M. Larrondo Petrie; Jose Texier; Rodolfo Andres Rivas Matta. Latin American and Caribbean Consortium of Engineering Institutions, 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July).

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

AU - Cáceres-Mauricio, Cesar

AU - Romero-Vasquez, Daniel

AU - Quiroz-Flores, Juan Carlos

PY - 2023

Y1 - 2023

N2 - Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77% and 95% respectively; in addition to the reduction of defective products by up to 2%.

AB - Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77% and 95% respectively; in addition to the reduction of defective products by up to 2%.

KW - 5'S

KW - Change management

KW - Demand Driven

KW - Jidoka

KW - MRP

KW - PDCA Cycle

KW - Total Productive Maintenance

UR - https://www.scopus.com/pages/publications/85172372912

M3 - Conference contribution

AN - SCOPUS:85172372912

T3 - Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology

BT - Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology

A2 - Larrondo Petrie, Maria M.

A2 - Texier, Jose

A2 - Matta, Rodolfo Andres Rivas

PB - Latin American and Caribbean Consortium of Engineering Institutions

T2 - 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023

Y2 - 19 July 2023 through 21 July 2023

ER -

Cáceres-Mauricio C, Romero-Vasquez D, Quiroz-Flores JC. Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. En Larrondo Petrie MM, Texier J, Matta RAR, editores, Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. Latin American and Caribbean Consortium of Engineering Institutions. 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

Huella

Citar esto