Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru

Patricia Pamela Sotelo-De La Cruz; Lorena Jazmin Soriano-Prado; Juan Carlos Indigoyen-Porras; Ivan Llactahuaman-Rodriguez; Jhon Rodrigo Ortiz-Zacarias; Sliver Ivan Del Carpio-Ramirez; Roberto Carlos Castillo-Velarde

doi:10.1109/CMAEE58250.2022.00031

Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru

Patricia Pamela Sotelo-De La Cruz, Lorena Jazmin Soriano-Prado, Juan Carlos Indigoyen-Porras, Ivan Llactahuaman-Rodriguez, Jhon Rodrigo Ortiz-Zacarias, Sliver Ivan Del Carpio-Ramirez, Roberto Carlos Castillo-Velarde

EAP Ingeniería mecatrónica

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

1 Cita (Scopus)

Resumen

In Peru, according to the National Road Safety Observatory of the Ministry of Transport and Communications, there were a total of 47629 traffic accidents that caused 1853 deaths and left 30850 with serious injuries. This work develops the mechatronic design through actuators, with approach sensors of an intelligent road for the prevention of accidents on the Qatac-Aija route. For the prototype was made with the Arduino IDE using Autodesk inventor following the use of the VDI 2206 standard, which the pavement was designed with the DIAASHTO-93 methodology. Obtaining a sensor actuator approaching the edges of the Qatac-Aija Road with red and green light signals releasing alarm sounds when approaching 5cm, finally for the vehicle c3 composed of a single axle was obtained a pavement of asphalt layer of 2 inches and a granular base of 4 inches, which contain the mechatronic design.

Idioma original	Inglés estadounidense
Título de la publicación alojada	Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022
Editorial	Institute of Electrical and Electronics Engineers Inc.
Páginas	133-138
-	6
ISBN (versión digital)	9798350346572
DOI	https://doi.org/10.1109/CMAEE58250.2022.00031
Estado	Indizado - 2022
Evento	2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022 - Virtual, Online, China Duración: 16 dic. 2022 → 18 dic. 2022

Serie de la publicación

Nombre	Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022

Conferencia

Conferencia	2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022
País/Territorio	China
Ciudad	Virtual, Online
Período	16/12/22 → 18/12/22

Nota bibliográfica

Publisher Copyright:
© 2022 IEEE.

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

Acceder al documento

10.1109/CMAEE58250.2022.00031

Citar esto

Sotelo-De La Cruz, P. P., Soriano-Prado, L. J., Indigoyen-Porras, J. C., Llactahuaman-Rodriguez, I., Ortiz-Zacarias, J. R., Del Carpio-Ramirez, S. I., & Castillo-Velarde, R. C. (2022). Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru. En Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022 (pp. 133-138). (Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CMAEE58250.2022.00031

Sotelo-De La Cruz, Patricia Pamela ; Soriano-Prado, Lorena Jazmin ; Indigoyen-Porras, Juan Carlos et al. / Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru. Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. pp. 133-138 (Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022).

@inproceedings{af7efa57a3634583adae8f21b5af3969,

title = "Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru",

abstract = "In Peru, according to the National Road Safety Observatory of the Ministry of Transport and Communications, there were a total of 47629 traffic accidents that caused 1853 deaths and left 30850 with serious injuries. This work develops the mechatronic design through actuators, with approach sensors of an intelligent road for the prevention of accidents on the Qatac-Aija route. For the prototype was made with the Arduino IDE using Autodesk inventor following the use of the VDI 2206 standard, which the pavement was designed with the DIAASHTO-93 methodology. Obtaining a sensor actuator approaching the edges of the Qatac-Aija Road with red and green light signals releasing alarm sounds when approaching 5cm, finally for the vehicle c3 composed of a single axle was obtained a pavement of asphalt layer of 2 inches and a granular base of 4 inches, which contain the mechatronic design.",

keywords = "AASHTO-93, Asphalt layers, Automation, Intelligent roads, Mechatronic design, Traffic accidents",

author = "{Sotelo-De La Cruz}, {Patricia Pamela} and Soriano-Prado, {Lorena Jazmin} and Indigoyen-Porras, {Juan Carlos} and Ivan Llactahuaman-Rodriguez and Ortiz-Zacarias, {Jhon Rodrigo} and {Del Carpio-Ramirez}, {Sliver Ivan} and Castillo-Velarde, {Roberto Carlos}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022 ; Conference date: 16-12-2022 Through 18-12-2022",

year = "2022",

doi = "10.1109/CMAEE58250.2022.00031",

language = "American English",

series = "Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "133--138",

booktitle = "Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022",

address = "United States",

}

Sotelo-De La Cruz, PP, Soriano-Prado, LJ, Indigoyen-Porras, JC, Llactahuaman-Rodriguez, I, Ortiz-Zacarias, JR , Del Carpio-Ramirez, SI & Castillo-Velarde, RC 2022, Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru. En Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022. Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022, Institute of Electrical and Electronics Engineers Inc., pp. 133-138, 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022, Virtual, Online, China, 16/12/22. https://doi.org/10.1109/CMAEE58250.2022.00031

Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru. / Sotelo-De La Cruz, Patricia Pamela; Soriano-Prado, Lorena Jazmin; Indigoyen-Porras, Juan Carlos et al.
Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. p. 133-138 (Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022).

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru

AU - Sotelo-De La Cruz, Patricia Pamela

AU - Soriano-Prado, Lorena Jazmin

AU - Indigoyen-Porras, Juan Carlos

AU - Llactahuaman-Rodriguez, Ivan

AU - Ortiz-Zacarias, Jhon Rodrigo

AU - Del Carpio-Ramirez, Sliver Ivan

AU - Castillo-Velarde, Roberto Carlos

PY - 2022

Y1 - 2022

N2 - In Peru, according to the National Road Safety Observatory of the Ministry of Transport and Communications, there were a total of 47629 traffic accidents that caused 1853 deaths and left 30850 with serious injuries. This work develops the mechatronic design through actuators, with approach sensors of an intelligent road for the prevention of accidents on the Qatac-Aija route. For the prototype was made with the Arduino IDE using Autodesk inventor following the use of the VDI 2206 standard, which the pavement was designed with the DIAASHTO-93 methodology. Obtaining a sensor actuator approaching the edges of the Qatac-Aija Road with red and green light signals releasing alarm sounds when approaching 5cm, finally for the vehicle c3 composed of a single axle was obtained a pavement of asphalt layer of 2 inches and a granular base of 4 inches, which contain the mechatronic design.

AB - In Peru, according to the National Road Safety Observatory of the Ministry of Transport and Communications, there were a total of 47629 traffic accidents that caused 1853 deaths and left 30850 with serious injuries. This work develops the mechatronic design through actuators, with approach sensors of an intelligent road for the prevention of accidents on the Qatac-Aija route. For the prototype was made with the Arduino IDE using Autodesk inventor following the use of the VDI 2206 standard, which the pavement was designed with the DIAASHTO-93 methodology. Obtaining a sensor actuator approaching the edges of the Qatac-Aija Road with red and green light signals releasing alarm sounds when approaching 5cm, finally for the vehicle c3 composed of a single axle was obtained a pavement of asphalt layer of 2 inches and a granular base of 4 inches, which contain the mechatronic design.

KW - AASHTO-93

KW - Asphalt layers

KW - Automation

KW - Intelligent roads

KW - Mechatronic design

KW - Traffic accidents

UR - http://www.scopus.com/inward/record.url?scp=85151334403&partnerID=8YFLogxK

U2 - 10.1109/CMAEE58250.2022.00031

DO - 10.1109/CMAEE58250.2022.00031

M3 - Conference contribution

AN - SCOPUS:85151334403

T3 - Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022

SP - 133

EP - 138

BT - Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022

Y2 - 16 December 2022 through 18 December 2022

ER -

Sotelo-De La Cruz PP, Soriano-Prado LJ, Indigoyen-Porras JC, Llactahuaman-Rodriguez I, Ortiz-Zacarias JR , Del Carpio-Ramirez SI et al. Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru. En Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022. Institute of Electrical and Electronics Engineers Inc. 2022. p. 133-138. (Proceedings - 2022 International Conference on Mechanical, Automation and Electrical Engineering, CMAEE 2022). doi: 10.1109/CMAEE58250.2022.00031

Mechatronic design of an intelligent road for accident prevention on the Qatac route, Aija-Peru

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

ODS de las Naciones Unidas

Acceder al documento

Huella

Citar esto