Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

Max Poma; Grimaldo Quispe; Nestor Mamani-Macedo; Gianpierre Zapata; Carlos Raymundo-Ibañez; Francisco Dominguez

doi:10.1007/978-3-030-44267-5_103

Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

Max Poma, Grimaldo Quispe, Nestor Mamani-Macedo, Gianpierre Zapata, Carlos Raymundo-Ibañez, Francisco Dominguez

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

2 Citas (Scopus)

Resumen

To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.

Idioma original	Inglés estadounidense
Título de la publicación alojada	Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies
Subtítulo de la publicación alojada	Future Applications, IHIET-AI 2020
Editores	Tareq Ahram, Redha Taiar, Vincent Gremeaux-Bader, Kamiar Aminian
Editorial	Springer
Páginas	683-689
-	7
ISBN (versión impresa)	9783030442668
DOI	https://doi.org/10.1007/978-3-030-44267-5_103
Estado	Indizado - 2020
Publicado de forma externa	Sí
Evento	2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020 - Lausanne, Suiza Duración: 23 abr. 2020 → 25 abr. 2020

Serie de la publicación

Nombre	Advances in Intelligent Systems and Computing
Volumen	1152 AISC
ISSN (versión impresa)	2194-5357
ISSN (versión digital)	2194-5365

Conferencia

Conferencia	2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020
País/Territorio	Suiza
Ciudad	Lausanne
Período	23/04/20 → 25/04/20

Nota bibliográfica

Publisher Copyright:
© The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020.

Acceder al documento

10.1007/978-3-030-44267-5_103

Citar esto

Poma, M., Quispe, G., Mamani-Macedo, N., Zapata, G., Raymundo-Ibañez, C., & Dominguez, F. (2020). Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. En T. Ahram, R. Taiar, V. Gremeaux-Bader, & K. Aminian (Eds.), Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020 (pp. 683-689). (Advances in Intelligent Systems and Computing; Vol. 1152 AISC). Springer. https://doi.org/10.1007/978-3-030-44267-5_103

Poma, Max ; Quispe, Grimaldo ; Mamani-Macedo, Nestor et al. / Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. editor / Tareq Ahram ; Redha Taiar ; Vincent Gremeaux-Bader ; Kamiar Aminian. Springer, 2020. pp. 683-689 (Advances in Intelligent Systems and Computing).

@inproceedings{6f3e02ad39bf4e8c9d382702850e0eba,

title = "Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method",

abstract = "To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.",

keywords = "Blasting mesh, Holmberg, Underground mining",

author = "Max Poma and Grimaldo Quispe and Nestor Mamani-Macedo and Gianpierre Zapata and Carlos Raymundo-Iba{\~n}ez and Francisco Dominguez",

note = "Publisher Copyright: {\textcopyright} The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020.; 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020 ; Conference date: 23-04-2020 Through 25-04-2020",

year = "2020",

doi = "10.1007/978-3-030-44267-5_103",

language = "American English",

isbn = "9783030442668",

series = "Advances in Intelligent Systems and Computing",

publisher = "Springer",

pages = "683--689",

editor = "Tareq Ahram and Redha Taiar and Vincent Gremeaux-Bader and Kamiar Aminian",

booktitle = "Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies",

}

Poma, M, Quispe, G, Mamani-Macedo, N, Zapata, G, Raymundo-Ibañez, C & Dominguez, F 2020, Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. En T Ahram, R Taiar, V Gremeaux-Bader & K Aminian (eds.), Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. Advances in Intelligent Systems and Computing, vol. 1152 AISC, Springer, pp. 683-689, 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020, Lausanne, Suiza, 23/04/20. https://doi.org/10.1007/978-3-030-44267-5_103

Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. / Poma, Max; Quispe, Grimaldo; Mamani-Macedo, Nestor et al.
Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. ed. / Tareq Ahram; Redha Taiar; Vincent Gremeaux-Bader; Kamiar Aminian. Springer, 2020. p. 683-689 (Advances in Intelligent Systems and Computing; Vol. 1152 AISC).

Producción científica: Libro o Capítulo del libro › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

AU - Poma, Max

AU - Quispe, Grimaldo

AU - Mamani-Macedo, Nestor

AU - Zapata, Gianpierre

AU - Raymundo-Ibañez, Carlos

AU - Dominguez, Francisco

N1 - Publisher Copyright: © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020.

PY - 2020

Y1 - 2020

N2 - To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.

AB - To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.

KW - Blasting mesh

KW - Holmberg

KW - Underground mining

UR - http://www.scopus.com/inward/record.url?scp=85085182737&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-44267-5_103

DO - 10.1007/978-3-030-44267-5_103

M3 - Conference contribution

AN - SCOPUS:85085182737

SN - 9783030442668

T3 - Advances in Intelligent Systems and Computing

SP - 683

EP - 689

BT - Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies

A2 - Ahram, Tareq

A2 - Taiar, Redha

A2 - Gremeaux-Bader, Vincent

A2 - Aminian, Kamiar

PB - Springer

T2 - 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020

Y2 - 23 April 2020 through 25 April 2020

ER -

Poma M, Quispe G, Mamani-Macedo N, Zapata G, Raymundo-Ibañez C, Dominguez F. Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. En Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, editores, Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. Springer. 2020. p. 683-689. (Advances in Intelligent Systems and Computing). doi: 10.1007/978-3-030-44267-5_103

Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

Acceder al documento

Huella

Citar esto