Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector

Sofía Millan; Martin Collao; Gonzalo Franco; Eduardo Del Solar

doi:10.18687/LEIRD2023.1.1.247

Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector

Sofía Millan, Martin Collao, Gonzalo Franco, Eduardo Del Solar

Research output: Chapter in Book/Report › Conference contribution › peer-review

Abstract

This scientific article focuses on addressing the problems related to the level of service in the textile sector of Mypes. A comprehensive study was carried out based on 40 articles published between 2018 and 2022, using the Scopus database and relevant keywds. The results revealed several problem cases, which were addressed through the implementation of lean manufacturing tools, such as 5S, work standardization and SMED, along with the use of MRP and MPS. These tools will be applied with the objective of improving the level of service, evaluating the percentage of improvement obtained through its implementation. In addition, solutions were proposed to optimize the supply of raw material, strengthen quality controls and properly calibrate the machinery. This study offers a valuable perspective and provides a solid starting point to improve the level of service in the textile sector of Mypes, thus contributing to the advancement and development of the industry.

Original language	American English
Title of host publication	Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development
Subtitle of host publication	"Igniting the Spark of Innovation: Emerging Trends, Disruptive Technologies, and Innovative Models for Business Success", LEIRD 2023
Publisher	Latin American and Caribbean Consortium of Engineering Institutions
ISBN (Electronic)	9786289520774
DOIs	https://doi.org/10.18687/LEIRD2023.1.1.247
State	Indexed - 2023
Externally published	Yes
Event	3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development, LEIRD 2023 - Virtual, Online Duration: 4 Dec 2023 → 6 Dec 2023

Publication series

Name	Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology
ISSN (Electronic)	2414-6390

Conference

Conference	3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development, LEIRD 2023
City	Virtual, Online
Period	4/12/23 → 6/12/23

Bibliographical note

Publisher Copyright:
© 2023 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.

Keywords

Lean Manufacturing
MRP y MPS
Service Level
Service Model
Textile Sector

Access to Document

10.18687/LEIRD2023.1.1.247

Cite this

Millan, S., Collao, M., Franco, G., & Del Solar, E. (2023). Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector. In Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development: "Igniting the Spark of Innovation: Emerging Trends, Disruptive Technologies, and Innovative Models for Business Success", LEIRD 2023 Article 247 (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology). Latin American and Caribbean Consortium of Engineering Institutions. https://doi.org/10.18687/LEIRD2023.1.1.247

Millan, Sofía ; Collao, Martin ; Franco, Gonzalo et al. / Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector. Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development: "Igniting the Spark of Innovation: Emerging Trends, Disruptive Technologies, and Innovative Models for Business Success", LEIRD 2023. Latin American and Caribbean Consortium of Engineering Institutions, 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

@inproceedings{90b4cd184d64494e907305396f8aec66,

title = "Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector",

abstract = "This scientific article focuses on addressing the problems related to the level of service in the textile sector of Mypes. A comprehensive study was carried out based on 40 articles published between 2018 and 2022, using the Scopus database and relevant keywds. The results revealed several problem cases, which were addressed through the implementation of lean manufacturing tools, such as 5S, work standardization and SMED, along with the use of MRP and MPS. These tools will be applied with the objective of improving the level of service, evaluating the percentage of improvement obtained through its implementation. In addition, solutions were proposed to optimize the supply of raw material, strengthen quality controls and properly calibrate the machinery. This study offers a valuable perspective and provides a solid starting point to improve the level of service in the textile sector of Mypes, thus contributing to the advancement and development of the industry.",

keywords = "Lean Manufacturing, MRP y MPS, Service Level, Service Model, Textile Sector",

author = "Sof{\'i}a Millan and Martin Collao and Gonzalo Franco and {Del Solar}, Eduardo",

note = "Publisher Copyright: {\textcopyright} 2023 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.; 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development, LEIRD 2023 ; Conference date: 04-12-2023 Through 06-12-2023",

year = "2023",

doi = "10.18687/LEIRD2023.1.1.247",

language = "American English",

series = "Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology",

publisher = "Latin American and Caribbean Consortium of Engineering Institutions",

booktitle = "Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development",

}

Millan, S, Collao, M, Franco, G & Del Solar, E 2023, Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector. in Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development: "Igniting the Spark of Innovation: Emerging Trends, Disruptive Technologies, and Innovative Models for Business Success", LEIRD 2023., 247, Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, Latin American and Caribbean Consortium of Engineering Institutions, 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development, LEIRD 2023, Virtual, Online, 4/12/23. https://doi.org/10.18687/LEIRD2023.1.1.247

Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector. / Millan, Sofía; Collao, Martin; Franco, Gonzalo et al.
Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development: "Igniting the Spark of Innovation: Emerging Trends, Disruptive Technologies, and Innovative Models for Business Success", LEIRD 2023. Latin American and Caribbean Consortium of Engineering Institutions, 2023. 247 (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

Research output: Chapter in Book/Report › Conference contribution › peer-review

TY - GEN

T1 - Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector

AU - Millan, Sofía

AU - Collao, Martin

AU - Franco, Gonzalo

AU - Del Solar, Eduardo

PY - 2023

Y1 - 2023

N2 - This scientific article focuses on addressing the problems related to the level of service in the textile sector of Mypes. A comprehensive study was carried out based on 40 articles published between 2018 and 2022, using the Scopus database and relevant keywds. The results revealed several problem cases, which were addressed through the implementation of lean manufacturing tools, such as 5S, work standardization and SMED, along with the use of MRP and MPS. These tools will be applied with the objective of improving the level of service, evaluating the percentage of improvement obtained through its implementation. In addition, solutions were proposed to optimize the supply of raw material, strengthen quality controls and properly calibrate the machinery. This study offers a valuable perspective and provides a solid starting point to improve the level of service in the textile sector of Mypes, thus contributing to the advancement and development of the industry.

AB - This scientific article focuses on addressing the problems related to the level of service in the textile sector of Mypes. A comprehensive study was carried out based on 40 articles published between 2018 and 2022, using the Scopus database and relevant keywds. The results revealed several problem cases, which were addressed through the implementation of lean manufacturing tools, such as 5S, work standardization and SMED, along with the use of MRP and MPS. These tools will be applied with the objective of improving the level of service, evaluating the percentage of improvement obtained through its implementation. In addition, solutions were proposed to optimize the supply of raw material, strengthen quality controls and properly calibrate the machinery. This study offers a valuable perspective and provides a solid starting point to improve the level of service in the textile sector of Mypes, thus contributing to the advancement and development of the industry.

KW - Lean Manufacturing

KW - MRP y MPS

KW - Service Level

KW - Service Model

KW - Textile Sector

UR - http://www.scopus.com/inward/record.url?scp=85187244017&partnerID=8YFLogxK

U2 - 10.18687/LEIRD2023.1.1.247

DO - 10.18687/LEIRD2023.1.1.247

M3 - Conference contribution

AN - SCOPUS:85187244017

T3 - Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology

BT - Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development

PB - Latin American and Caribbean Consortium of Engineering Institutions

T2 - 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development, LEIRD 2023

Y2 - 4 December 2023 through 6 December 2023

ER -

Millan S, Collao M, Franco G, Del Solar E. Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector. In Proceedings of the 3rd LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development: "Igniting the Spark of Innovation: Emerging Trends, Disruptive Technologies, and Innovative Models for Business Success", LEIRD 2023. Latin American and Caribbean Consortium of Engineering Institutions. 2023. 247. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology). doi: 10.18687/LEIRD2023.1.1.247

Service model based on Lean Manufacturing, MRP and MPS to increase the level of service in a MYPE in the textile sector

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Fingerprint

Cite this