Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

Erick Hanson Bolanos Valencia; Yeimy Salvatierra Garcia; Grimaldo Quispe Santivanez; Elva Castaneda

doi:10.1109/ICIM56520.2022.00040

Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

Erick Hanson Bolanos Valencia
, Yeimy Salvatierra Garcia
, Grimaldo Quispe Santivanez
, Elva Castaneda

Research output: Chapter in Book/Report › Conference contribution › peer-review

3 Scopus citations

Abstract

The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7% in preparation time, 3% in cycle time and 4.2% in production capacity.

Original language	American English
Title of host publication	Proceedings - 2022 8th International Conference on Information Management, ICIM 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	182-185
Number of pages	4
ISBN (Electronic)	9781665451741
DOIs	https://doi.org/10.1109/ICIM56520.2022.00040
State	Indexed - 2022
Externally published	Yes
Event	8th International Conference on Information Management, ICIM 2022 - Cambridge, United Kingdom Duration: 25 Mar 2022 → 27 Mar 2022

Publication series

Name	Proceedings - 2022 8th International Conference on Information Management, ICIM 2022

Conference

Conference	8th International Conference on Information Management, ICIM 2022
Country/Territory	United Kingdom
City	Cambridge
Period	25/03/22 → 27/03/22

Bibliographical note

Publisher Copyright:
© 2022 IEEE.

Keywords

SMED
Set-up
VSM
lean manufacturing
metalworking

Access to Document

10.1109/ICIM56520.2022.00040

Cite this

Bolanos Valencia, E. H., Garcia, Y. S., Santivanez, G. Q., & Castaneda, E. (2022). Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. In Proceedings - 2022 8th International Conference on Information Management, ICIM 2022 (pp. 182-185). (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICIM56520.2022.00040

Bolanos Valencia, Erick Hanson ; Garcia, Yeimy Salvatierra ; Santivanez, Grimaldo Quispe et al. / Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Institute of Electrical and Electronics Engineers Inc., 2022. pp. 182-185 (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022).

@inproceedings{03b0bd9164214919a36d8cf1cb1fe68f,

title = "Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector",

abstract = "The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7\% in preparation time, 3\% in cycle time and 4.2\% in production capacity.",

keywords = "SMED, Set-up, VSM, lean manufacturing, metalworking",

author = "\{Bolanos Valencia\}, \{Erick Hanson\} and Garcia, \{Yeimy Salvatierra\} and Santivanez, \{Grimaldo Quispe\} and Elva Castaneda",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 8th International Conference on Information Management, ICIM 2022 ; Conference date: 25-03-2022 Through 27-03-2022",

year = "2022",

doi = "10.1109/ICIM56520.2022.00040",

language = "American English",

series = "Proceedings - 2022 8th International Conference on Information Management, ICIM 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "182--185",

booktitle = "Proceedings - 2022 8th International Conference on Information Management, ICIM 2022",

address = "United States",

}

Bolanos Valencia, EH, Garcia, YS, Santivanez, GQ & Castaneda, E 2022, Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. in Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Proceedings - 2022 8th International Conference on Information Management, ICIM 2022, Institute of Electrical and Electronics Engineers Inc., pp. 182-185, 8th International Conference on Information Management, ICIM 2022, Cambridge, United Kingdom, 25/03/22. https://doi.org/10.1109/ICIM56520.2022.00040

Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. / Bolanos Valencia, Erick Hanson; Garcia, Yeimy Salvatierra; Santivanez, Grimaldo Quispe et al.
Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Institute of Electrical and Electronics Engineers Inc., 2022. p. 182-185 (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022).

Research output: Chapter in Book/Report › Conference contribution › peer-review

TY - GEN

T1 - Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

AU - Bolanos Valencia, Erick Hanson

AU - Garcia, Yeimy Salvatierra

AU - Santivanez, Grimaldo Quispe

AU - Castaneda, Elva

PY - 2022

Y1 - 2022

N2 - The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7% in preparation time, 3% in cycle time and 4.2% in production capacity.

AB - The purpose of this research is to address one of the most frequent problems of the metalworking sector companies which processes present high variability due to a bad management of their setup times. In this sense, a four-phase management model based on lean manufacturing was developed by applying VSM and SMED. This model was validated in a metalworking SME, specifically in its welding process, which achieved a reduction of 87.7% in preparation time, 3% in cycle time and 4.2% in production capacity.

KW - SMED

KW - Set-up

KW - VSM

KW - lean manufacturing

KW - metalworking

UR - https://www.scopus.com/pages/publications/85137061898

U2 - 10.1109/ICIM56520.2022.00040

DO - 10.1109/ICIM56520.2022.00040

M3 - Conference contribution

AN - SCOPUS:85137061898

T3 - Proceedings - 2022 8th International Conference on Information Management, ICIM 2022

SP - 182

EP - 185

BT - Proceedings - 2022 8th International Conference on Information Management, ICIM 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 8th International Conference on Information Management, ICIM 2022

Y2 - 25 March 2022 through 27 March 2022

ER -

Bolanos Valencia EH, Garcia YS, Santivanez GQ, Castaneda E. Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector. In Proceedings - 2022 8th International Conference on Information Management, ICIM 2022. Institute of Electrical and Electronics Engineers Inc. 2022. p. 182-185. (Proceedings - 2022 8th International Conference on Information Management, ICIM 2022). doi: 10.1109/ICIM56520.2022.00040

Production Management Model to Reduce Cycle Times Using Lean Manufacturing in a Company in the Metalworking Sector

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Fingerprint

Cite this