Half face mask with regulation thermal stability system for continuous air flow: Stabimask

Helen Jhoana Pantoja Marin; Maycol Nelson Guerra Limas; Gino Rolando Paita Sulluchuco; Rafael De La Cruz Casaño; Alberto Jesus Torres Hinostroza

doi:10.1145/3512826.3512848

Half face mask with regulation thermal stability system for continuous air flow: Stabimask

Helen Jhoana Pantoja Marin
, Maycol Nelson Guerra Limas
, Gino Rolando Paita Sulluchuco
, Rafael De La Cruz Casaño
, Alberto Jesus Torres Hinostroza

Continental Fablab

Research output: Chapter in Book/Report › Conference contribution › peer-review

Abstract

This article presents the design and prototyping of an electronic mask as personal protective equipment for the virus pandemic known as COVID - 19. Needs were identified such as: tightness and comfort. Requirements for use for long periods of time; this was considered for the design, also it has an adjustable ventilation system. The mask was simulated and validated with Solidworks Flow Simulation software, in addition a PID control model was implemented, thereby, it was shown that enough flow is generated to vary the temperature in a range of 20 to 37.2 ° C inside the mask. The design considers an outlet duct and an inlet duct with filters that prevent the entry of polluting particles, providing adequate protection. The prototype was made by 3D printing, And the thermal stability was achieved with the implementation of the temperature regulation system. The results obtained were validated, and they allow to future research to provide greater efficiency to masks.

Original language	American English
Title of host publication	3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022
Publisher	Association for Computing Machinery
Pages	80-84
Number of pages	5
ISBN (Electronic)	9781450395489
DOIs	https://doi.org/10.1145/3512826.3512848
State	Indexed - 11 Jan 2022
Event	3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022 - Bangkok, Thailand Duration: 11 Jan 2022 → 13 Jan 2022

Publication series

Name	ACM International Conference Proceeding Series

Conference

Conference	3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022
Country/Territory	Thailand
City	Bangkok
Period	11/01/22 → 13/01/22

Bibliographical note

Publisher Copyright:
© 2022 ACM.

Keywords

3D printing
Electronic mask
Regulation system
Thermal stability

Access to Document

10.1145/3512826.3512848

Cite this

Pantoja Marin, H. J., Guerra Limas, M. N., Paita Sulluchuco, G. R., De La Cruz Casaño, R., & Torres Hinostroza, A. J. (2022). Half face mask with regulation thermal stability system for continuous air flow: Stabimask. In 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022 (pp. 80-84). (ACM International Conference Proceeding Series). Association for Computing Machinery. https://doi.org/10.1145/3512826.3512848

Pantoja Marin, Helen Jhoana ; Guerra Limas, Maycol Nelson ; Paita Sulluchuco, Gino Rolando et al. / Half face mask with regulation thermal stability system for continuous air flow : Stabimask. 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022. Association for Computing Machinery, 2022. pp. 80-84 (ACM International Conference Proceeding Series).

@inproceedings{b81d6b3dc9184d5ea89a029c37e070d6,

title = "Half face mask with regulation thermal stability system for continuous air flow: Stabimask",

abstract = "This article presents the design and prototyping of an electronic mask as personal protective equipment for the virus pandemic known as COVID - 19. Needs were identified such as: tightness and comfort. Requirements for use for long periods of time; this was considered for the design, also it has an adjustable ventilation system. The mask was simulated and validated with Solidworks Flow Simulation software, in addition a PID control model was implemented, thereby, it was shown that enough flow is generated to vary the temperature in a range of 20 to 37.2 ° C inside the mask. The design considers an outlet duct and an inlet duct with filters that prevent the entry of polluting particles, providing adequate protection. The prototype was made by 3D printing, And the thermal stability was achieved with the implementation of the temperature regulation system. The results obtained were validated, and they allow to future research to provide greater efficiency to masks.",

keywords = "3D printing, Electronic mask, Regulation system, Thermal stability",

author = "\{Pantoja Marin\}, \{Helen Jhoana\} and \{Guerra Limas\}, \{Maycol Nelson\} and \{Paita Sulluchuco\}, \{Gino Rolando\} and \{De La Cruz Casa{\~n}o\}, Rafael and \{Torres Hinostroza\}, \{Alberto Jesus\}",

note = "Publisher Copyright: {\textcopyright} 2022 ACM.; 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022 ; Conference date: 11-01-2022 Through 13-01-2022",

year = "2022",

month = jan,

day = "11",

doi = "10.1145/3512826.3512848",

language = "American English",

series = "ACM International Conference Proceeding Series",

publisher = "Association for Computing Machinery",

pages = "80--84",

booktitle = "3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022",

}

Pantoja Marin, HJ, Guerra Limas, MN, Paita Sulluchuco, GR, De La Cruz Casaño, R & Torres Hinostroza, AJ 2022, Half face mask with regulation thermal stability system for continuous air flow: Stabimask. in 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022. ACM International Conference Proceeding Series, Association for Computing Machinery, pp. 80-84, 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022, Bangkok, Thailand, 11/01/22. https://doi.org/10.1145/3512826.3512848

Half face mask with regulation thermal stability system for continuous air flow: Stabimask. / Pantoja Marin, Helen Jhoana; Guerra Limas, Maycol Nelson; Paita Sulluchuco, Gino Rolando et al.
3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022. Association for Computing Machinery, 2022. p. 80-84 (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report › Conference contribution › peer-review

TY - GEN

T1 - Half face mask with regulation thermal stability system for continuous air flow

T2 - 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022

AU - Pantoja Marin, Helen Jhoana

AU - Guerra Limas, Maycol Nelson

AU - Paita Sulluchuco, Gino Rolando

AU - De La Cruz Casaño, Rafael

AU - Torres Hinostroza, Alberto Jesus

PY - 2022/1/11

Y1 - 2022/1/11

N2 - This article presents the design and prototyping of an electronic mask as personal protective equipment for the virus pandemic known as COVID - 19. Needs were identified such as: tightness and comfort. Requirements for use for long periods of time; this was considered for the design, also it has an adjustable ventilation system. The mask was simulated and validated with Solidworks Flow Simulation software, in addition a PID control model was implemented, thereby, it was shown that enough flow is generated to vary the temperature in a range of 20 to 37.2 ° C inside the mask. The design considers an outlet duct and an inlet duct with filters that prevent the entry of polluting particles, providing adequate protection. The prototype was made by 3D printing, And the thermal stability was achieved with the implementation of the temperature regulation system. The results obtained were validated, and they allow to future research to provide greater efficiency to masks.

AB - This article presents the design and prototyping of an electronic mask as personal protective equipment for the virus pandemic known as COVID - 19. Needs were identified such as: tightness and comfort. Requirements for use for long periods of time; this was considered for the design, also it has an adjustable ventilation system. The mask was simulated and validated with Solidworks Flow Simulation software, in addition a PID control model was implemented, thereby, it was shown that enough flow is generated to vary the temperature in a range of 20 to 37.2 ° C inside the mask. The design considers an outlet duct and an inlet duct with filters that prevent the entry of polluting particles, providing adequate protection. The prototype was made by 3D printing, And the thermal stability was achieved with the implementation of the temperature regulation system. The results obtained were validated, and they allow to future research to provide greater efficiency to masks.

KW - 3D printing

KW - Electronic mask

KW - Regulation system

KW - Thermal stability

UR - https://www.scopus.com/pages/publications/85138752507

U2 - 10.1145/3512826.3512848

DO - 10.1145/3512826.3512848

M3 - Conference contribution

AN - SCOPUS:85138752507

T3 - ACM International Conference Proceeding Series

SP - 80

EP - 84

BT - 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022

PB - Association for Computing Machinery

Y2 - 11 January 2022 through 13 January 2022

ER -

Pantoja Marin HJ, Guerra Limas MN, Paita Sulluchuco GR, De La Cruz Casaño R, Torres Hinostroza AJ. Half face mask with regulation thermal stability system for continuous air flow: Stabimask. In 3rd International Conference on Artificial Intelligence in Electronics Engineering, AIEE 2022. Association for Computing Machinery. 2022. p. 80-84. (ACM International Conference Proceeding Series). doi: 10.1145/3512826.3512848

Half face mask with regulation thermal stability system for continuous air flow: Stabimask

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Fingerprint

Cite this