Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

Max Poma; Grimaldo Quispe; Nestor Mamani-Macedo; Gianpierre Zapata; Carlos Raymundo-Ibañez; Francisco Dominguez

doi:10.1007/978-3-030-44267-5_103

Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

Max Poma
, Grimaldo Quispe
, Nestor Mamani-Macedo
, Gianpierre Zapata
, Carlos Raymundo-Ibañez
, Francisco Dominguez

Research output: Chapter in Book/Report › Conference contribution › peer-review

2 Scopus citations

Abstract

To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.

Original language	American English
Title of host publication	Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies
Subtitle of host publication	Future Applications, IHIET-AI 2020
Editors	Tareq Ahram, Redha Taiar, Vincent Gremeaux-Bader, Kamiar Aminian
Publisher	Springer
Pages	683-689
Number of pages	7
ISBN (Print)	9783030442668
DOIs	https://doi.org/10.1007/978-3-030-44267-5_103
State	Indexed - 2020
Externally published	Yes
Event	2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020 - Lausanne, Switzerland Duration: 23 Apr 2020 → 25 Apr 2020

Publication series

Name	Advances in Intelligent Systems and Computing
Volume	1152 AISC
ISSN (Print)	2194-5357
ISSN (Electronic)	2194-5365

Conference

Conference	2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020
Country/Territory	Switzerland
City	Lausanne
Period	23/04/20 → 25/04/20

Bibliographical note

Publisher Copyright:
© The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020.

Keywords

Blasting mesh
Holmberg
Underground mining

Access to Document

10.1007/978-3-030-44267-5_103

Cite this

Poma, M., Quispe, G., Mamani-Macedo, N., Zapata, G., Raymundo-Ibañez, C., & Dominguez, F. (2020). Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. In T. Ahram, R. Taiar, V. Gremeaux-Bader, & K. Aminian (Eds.), Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020 (pp. 683-689). (Advances in Intelligent Systems and Computing; Vol. 1152 AISC). Springer. https://doi.org/10.1007/978-3-030-44267-5_103

Poma, Max ; Quispe, Grimaldo ; Mamani-Macedo, Nestor et al. / Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. editor / Tareq Ahram ; Redha Taiar ; Vincent Gremeaux-Bader ; Kamiar Aminian. Springer, 2020. pp. 683-689 (Advances in Intelligent Systems and Computing).

@inproceedings{6f3e02ad39bf4e8c9d382702850e0eba,

title = "Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method",

abstract = "To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95\% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.",

keywords = "Blasting mesh, Holmberg, Underground mining",

author = "Max Poma and Grimaldo Quispe and Nestor Mamani-Macedo and Gianpierre Zapata and Carlos Raymundo-Iba{\~n}ez and Francisco Dominguez",

note = "Publisher Copyright: {\textcopyright} The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020.; 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020 ; Conference date: 23-04-2020 Through 25-04-2020",

year = "2020",

doi = "10.1007/978-3-030-44267-5\_103",

language = "American English",

isbn = "9783030442668",

series = "Advances in Intelligent Systems and Computing",

publisher = "Springer",

pages = "683--689",

editor = "Tareq Ahram and Redha Taiar and Vincent Gremeaux-Bader and Kamiar Aminian",

booktitle = "Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies",

}

Poma, M, Quispe, G, Mamani-Macedo, N, Zapata, G, Raymundo-Ibañez, C & Dominguez, F 2020, Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. in T Ahram, R Taiar, V Gremeaux-Bader & K Aminian (eds), Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. Advances in Intelligent Systems and Computing, vol. 1152 AISC, Springer, pp. 683-689, 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020, Lausanne, Switzerland, 23/04/20. https://doi.org/10.1007/978-3-030-44267-5_103

Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. / Poma, Max; Quispe, Grimaldo; Mamani-Macedo, Nestor et al.
Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. ed. / Tareq Ahram; Redha Taiar; Vincent Gremeaux-Bader; Kamiar Aminian. Springer, 2020. p. 683-689 (Advances in Intelligent Systems and Computing; Vol. 1152 AISC).

Research output: Chapter in Book/Report › Conference contribution › peer-review

TY - GEN

T1 - Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

AU - Poma, Max

AU - Quispe, Grimaldo

AU - Mamani-Macedo, Nestor

AU - Zapata, Gianpierre

AU - Raymundo-Ibañez, Carlos

AU - Dominguez, Francisco

N1 - Publisher Copyright: © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020.

PY - 2020

Y1 - 2020

N2 - To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.

AB - To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.

KW - Blasting mesh

KW - Holmberg

KW - Underground mining

UR - https://www.scopus.com/pages/publications/85085182737

U2 - 10.1007/978-3-030-44267-5_103

DO - 10.1007/978-3-030-44267-5_103

M3 - Conference contribution

AN - SCOPUS:85085182737

SN - 9783030442668

T3 - Advances in Intelligent Systems and Computing

SP - 683

EP - 689

BT - Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies

A2 - Ahram, Tareq

A2 - Taiar, Redha

A2 - Gremeaux-Bader, Vincent

A2 - Aminian, Kamiar

PB - Springer

T2 - 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020

Y2 - 23 April 2020 through 25 April 2020

ER -

Poma M, Quispe G, Mamani-Macedo N, Zapata G, Raymundo-Ibañez C, Dominguez F. Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. In Ahram T, Taiar R, Gremeaux-Bader V, Aminian K, editors, Human Interaction, Emerging Technologies and Future Applications II - Proceedings of the 2nd International Conference on Human Interaction and Emerging Technologies: Future Applications, IHIET-AI 2020. Springer. 2020. p. 683-689. (Advances in Intelligent Systems and Computing). doi: 10.1007/978-3-030-44267-5_103

Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Fingerprint

Cite this