Design of an Automated System for the Rocoto Selection Process Based on Color and Size

Alem Huayta-Uribe; Lizbett Nattaly Mantari-Ramos; Karolina Solorzano-Pomachagua; Jamil Fernando Bravo-Villar; Jhon Anderson Ureta-Mata; Deyby Huamanchahua

doi:10.1109/CompAuto55930.2022.00017

Design of an Automated System for the Rocoto Selection Process Based on Color and Size

Alem Huayta-Uribe, Lizbett Nattaly Mantari-Ramos, Karolina Solorzano-Pomachagua, Jamil Fernando Bravo-Villar, Jhon Anderson Ureta-Mata, Deyby Huamanchahua

Research output: Chapter in Book/Report › Conference contribution › peer-review

1 Scopus citations

Abstract

Conventionally, native Peruvian rocotos have a great diversity in terms of color, size, and shape, with red, orange, and green rocotos standing out. Also, their method for the selection process of this product is labor-intensive, bringing with it more costly productivity, the risk to the consumer's health, and uncertain reliability. Therefore, this research presents the design of an automated system for the rocoto grading process taking into account 2 main parameters: size and color. The system uses mechanisms for reading information through an HMI interface, which allows monitoring and control from the panel, for this, a PLC controller is used as the brain of the whole system, and for the simulation of the entire system is used the software Tia portal, Factory IO and LabVIEW. As a result, the correct and complete operation of the rocoto selection process was obtained, thus concluding the viability of this system and the development of new research.

Original language	American English
Title of host publication	Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	56-60
Number of pages	5
ISBN (Electronic)	9781665481946
DOIs	https://doi.org/10.1109/CompAuto55930.2022.00017
State	Indexed - 2022
Event	2nd International Conference on Computers and Automation, CompAuto 2022 - Virtual, Online, France Duration: 18 Aug 2022 → 20 Aug 2022

Publication series

Name	Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022

Conference

Conference	2nd International Conference on Computers and Automation, CompAuto 2022
Country/Territory	France
City	Virtual, Online
Period	18/08/22 → 20/08/22

Bibliographical note

Publisher Copyright:
© 2022 IEEE.

Keywords

Tia Portal
automation
control
factory IO
monitoring
rocoto
sorting

Access to Document

10.1109/CompAuto55930.2022.00017

Cite this

Huayta-Uribe, A., Mantari-Ramos, L. N., Solorzano-Pomachagua, K., Bravo-Villar, J. F., Ureta-Mata, J. A., & Huamanchahua, D. (2022). Design of an Automated System for the Rocoto Selection Process Based on Color and Size. In Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022 (pp. 56-60). (Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CompAuto55930.2022.00017

Huayta-Uribe, Alem ; Mantari-Ramos, Lizbett Nattaly ; Solorzano-Pomachagua, Karolina et al. / Design of an Automated System for the Rocoto Selection Process Based on Color and Size. Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022. Institute of Electrical and Electronics Engineers Inc., 2022. pp. 56-60 (Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022).

@inproceedings{c55cd86490f445738edc96a84ed8b0ed,

title = "Design of an Automated System for the Rocoto Selection Process Based on Color and Size",

abstract = "Conventionally, native Peruvian rocotos have a great diversity in terms of color, size, and shape, with red, orange, and green rocotos standing out. Also, their method for the selection process of this product is labor-intensive, bringing with it more costly productivity, the risk to the consumer's health, and uncertain reliability. Therefore, this research presents the design of an automated system for the rocoto grading process taking into account 2 main parameters: size and color. The system uses mechanisms for reading information through an HMI interface, which allows monitoring and control from the panel, for this, a PLC controller is used as the brain of the whole system, and for the simulation of the entire system is used the software Tia portal, Factory IO and LabVIEW. As a result, the correct and complete operation of the rocoto selection process was obtained, thus concluding the viability of this system and the development of new research.",

keywords = "Tia Portal, automation, control, factory IO, monitoring, rocoto, sorting",

author = "Alem Huayta-Uribe and Mantari-Ramos, {Lizbett Nattaly} and Karolina Solorzano-Pomachagua and Bravo-Villar, {Jamil Fernando} and Ureta-Mata, {Jhon Anderson} and Deyby Huamanchahua",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2nd International Conference on Computers and Automation, CompAuto 2022 ; Conference date: 18-08-2022 Through 20-08-2022",

year = "2022",

doi = "10.1109/CompAuto55930.2022.00017",

language = "American English",

series = "Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "56--60",

booktitle = "Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022",

address = "United States",

}

Huayta-Uribe, A, Mantari-Ramos, LN, Solorzano-Pomachagua, K, Bravo-Villar, JF, Ureta-Mata, JA & Huamanchahua, D 2022, Design of an Automated System for the Rocoto Selection Process Based on Color and Size. in Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022. Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022, Institute of Electrical and Electronics Engineers Inc., pp. 56-60, 2nd International Conference on Computers and Automation, CompAuto 2022, Virtual, Online, France, 18/08/22. https://doi.org/10.1109/CompAuto55930.2022.00017

Design of an Automated System for the Rocoto Selection Process Based on Color and Size. / Huayta-Uribe, Alem; Mantari-Ramos, Lizbett Nattaly; Solorzano-Pomachagua, Karolina et al.
Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022. Institute of Electrical and Electronics Engineers Inc., 2022. p. 56-60 (Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022).

Research output: Chapter in Book/Report › Conference contribution › peer-review

TY - GEN

T1 - Design of an Automated System for the Rocoto Selection Process Based on Color and Size

AU - Huayta-Uribe, Alem

AU - Mantari-Ramos, Lizbett Nattaly

AU - Solorzano-Pomachagua, Karolina

AU - Bravo-Villar, Jamil Fernando

AU - Ureta-Mata, Jhon Anderson

AU - Huamanchahua, Deyby

PY - 2022

Y1 - 2022

N2 - Conventionally, native Peruvian rocotos have a great diversity in terms of color, size, and shape, with red, orange, and green rocotos standing out. Also, their method for the selection process of this product is labor-intensive, bringing with it more costly productivity, the risk to the consumer's health, and uncertain reliability. Therefore, this research presents the design of an automated system for the rocoto grading process taking into account 2 main parameters: size and color. The system uses mechanisms for reading information through an HMI interface, which allows monitoring and control from the panel, for this, a PLC controller is used as the brain of the whole system, and for the simulation of the entire system is used the software Tia portal, Factory IO and LabVIEW. As a result, the correct and complete operation of the rocoto selection process was obtained, thus concluding the viability of this system and the development of new research.

AB - Conventionally, native Peruvian rocotos have a great diversity in terms of color, size, and shape, with red, orange, and green rocotos standing out. Also, their method for the selection process of this product is labor-intensive, bringing with it more costly productivity, the risk to the consumer's health, and uncertain reliability. Therefore, this research presents the design of an automated system for the rocoto grading process taking into account 2 main parameters: size and color. The system uses mechanisms for reading information through an HMI interface, which allows monitoring and control from the panel, for this, a PLC controller is used as the brain of the whole system, and for the simulation of the entire system is used the software Tia portal, Factory IO and LabVIEW. As a result, the correct and complete operation of the rocoto selection process was obtained, thus concluding the viability of this system and the development of new research.

KW - Tia Portal

KW - automation

KW - control

KW - factory IO

KW - monitoring

KW - rocoto

KW - sorting

UR - http://www.scopus.com/inward/record.url?scp=85148485344&partnerID=8YFLogxK

U2 - 10.1109/CompAuto55930.2022.00017

DO - 10.1109/CompAuto55930.2022.00017

M3 - Conference contribution

AN - SCOPUS:85148485344

T3 - Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022

SP - 56

EP - 60

BT - Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2nd International Conference on Computers and Automation, CompAuto 2022

Y2 - 18 August 2022 through 20 August 2022

ER -

Huayta-Uribe A, Mantari-Ramos LN, Solorzano-Pomachagua K, Bravo-Villar JF, Ureta-Mata JA, Huamanchahua D. Design of an Automated System for the Rocoto Selection Process Based on Color and Size. In Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022. Institute of Electrical and Electronics Engineers Inc. 2022. p. 56-60. (Proceedings - 2022 2nd International Conference on Computers and Automation, CompAuto 2022). doi: 10.1109/CompAuto55930.2022.00017

Design of an Automated System for the Rocoto Selection Process Based on Color and Size

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Fingerprint

Cite this